W1siziisimnvbxbpbgvkx3rozw1lx2fzc2v0cy9tb3jzb24vanbnl2jhbm5lci1kzwzhdwx0ltiuanbnil1d

Home

EC&I Technicians

  • Location

    Kent, England

  • Sector:

    Nuclear Power Station

  • Job type:

    Contract

  • Salary:

    £25.00 - £29.00 per hour + Bonus

  • Contact:

    Michaela Folkes

  • Contact email:

    leiston@morson.com

  • Job ref:

    143906MFO_1526918401

  • Published:

    29 days ago

  • Duration:

    Until November 2018

  • Expiry date:

    2018-05-28

  • Start date:

    July / Aug 2018

  • Client:

    #

Due to an impending Nuclear Outage we are recruiting for 10x EC&I Technicians for Dungeness B Power Station in Kent.

Your role will consist of, but will not be restricted to the following:
Job Description
Reporting to the Site Supervisor for all matters relating to quality and safety you will carry out all work as instructed by the Site Supervisor to the requirements of the task documentation (i.e. Work Order Card Method Statement, Construction Quality Plan Risk Assessments etc.), with due care to minimise the potential for inadvertent disturbance to Site plant or equipment.
Comply with, in addition to the above-mentioned documents, all other relevant safety instructions as identified through the Site Supervisor.
Work in compliance with the requirements of the OC Health and Safety
Report all anomalies, safety hazards, plant damage and specific problems to the Site Supervisor/Engineer before proceeding further.
Interpret and implement the requirements of the Electricity at Work Regulations and IEE Regulations.
Cooperate with the Client, ensuring that work is undertaken to Client instruction and Client specification, in the implementation of Client safe working methods.
Comply with the rules and regulations, permit systems and safety requirements in force on the site and to promote these requirements within working parties.
Promote a positive health and safety culture.
Acknowledge appointments for Lifting, COSHH, Electrical Safety, RPA, RPS personnel etc, and authorisations for Driving, PAT, etc.
Comply with the requirements of both the Clients Safety Plan, and the the site Health, Safety, Environmental and Welfare Plan, as well as associated documents and legislation.
Comply with the requirements with regard to Working Hours and Fatigue.
Work to avoid danger and to others that might be affected by actions or omissions.
Comply with the requirements of Drugs and Alcohol Policy.
Comply with the requirements with regard to contact with Asbestos.
Maintain personal training/qualifications as required by the Client and our Clients systems (special process qualifications, supervisory, task, appointments etc.).
Identify the need for 'in-service' training, for him/herself and to advise management accordingly.
Report accidents, incidents, and near misses (or unplanned events) to both the Clients and our Clients Management as specified in respective management systems.
Report all anomalies, safety hazards, plant damage and specific problems through the Supervisor/Engineer before proceeding further.
Adopt at all times the S*T*A*R*T principle (Stop, Think, Act, Review, & Tell), whilst engaged on all types of works on site.
Attend weekly Toolbox Talks relating to matters of Safety.
Participate in the production and review of Point of Work Risk Assessments where the Client system does not provide an equivalent.


Candidate Specification
These roles will require the candidates to have Site installation, maintenance experience with preference to Rotating machines, engines, compressors, turbines. Preferably within the Nuclear, Power Generation or Oil and Gas industries.

Candidates will hold a CCNSG Safety Passport and or IOSH(where applicable) and full Nuclear CTC Clearance.

Hours: 10/12 hour shifts on a 12on - 2off shift system - days or nights.
Duration: approx. July 2018 until November 2018.
Hourly rates plus Loyalty/Completion Bonus.

For more information please telephone Leiston 01728 832862.
Alternatively please email your up to date CV quoting ref: 143906