Romney Marsh, Kent
£25.00 - £29.00 per hour
3 months ago
Until November 2018
EC&I Technicians for Dungeness B Power Station in Kent for immediate start.
Reporting to the Site Supervisor for all matters relating to quality and safety you will carry out all work as instructed by the Site Supervisor to the requirements of the task documentation (i.e. Work Order Card Method Statement, Construction Quality Plan Risk Assessments etc.), with due care to minimise the potential for inadvertent disturbance to Site plant or equipment.
Comply with, in addition to the above-mentioned documents, all other relevant safety instructions as identified through the Site Supervisor.
Report all anomalies, safety hazards, plant damage and specific problems to the Site Supervisor/Engineer before proceeding further.
Interpret and implement the requirements of the Electricity at Work Regulations and IEE Regulations.
Cooperate with the Client, ensuring that work is undertaken to Client instruction and Client specification, in the implementation of Client safe working methods.
Acknowledge appointments for Lifting, COSHH, Electrical Safety, RPA, RPS personnel etc, and authorisations for Driving, PAT, etc.
Maintain personal training/qualifications as required by the Client and our Clients systems (special process qualifications, supervisory, task, appointments etc.).
Identify the need for 'in-service' training, for him/herself and to advise management accordingly.
Report accidents, incidents, and near misses (or unplanned events) to both the Clients and our Clients Management as specified in respective management systems.
Report all anomalies, safety hazards, plant damage and specific problems through the Supervisor/Engineer before proceeding further.
Adopt at all times the S*T*A*R*T principle (Stop, Think, Act, Review, & Tell), whilst engaged on all types of works on site.
Attend weekly Toolbox Talks relating to matters of Safety.
Participate in the production and review of Point of Work Risk Assessments where the Client system does not provide an equivalent.
These roles will require the candidates to have Site installation, maintenance experience with preference to Rotating machines, engines, compressors, turbines. Preferably within the Nuclear, Power Generation or Oil and Gas industries.
Candidates will hold a CCNSG Safety Passport and or IOSH(where applicable) and full Nuclear CTC Clearance.
Hours: 10/12 hour shifts on a 12 days on - 2 days off shift system - days or nights.
plus Loyalty/Completion Bonus.